The installation process of the servo electric screw press can be divided into the following steps:

Preparation: Before starting the installation, ensure that all parts have undergone rigorous quality testing and meet the design requirements. Prepare required installation tools, such as screwdrivers, wrenches, and levels.

Base installation: Install the servo electric screw press on a smooth, sturdy base according to the equipment installation guide. Ensure that the equipment is horizontal and fixed according to the specified requirements.

Parts assembly: According to the assembly drawings, the parts are gradually assembled on the equipment. Start by installing the frame and fuselage, making sure they are securely attached to the foundation. Next install the electric cylinder, place it on top of the fuselage and fasten it with screws. Then install the working platform, guide column, guide sleeve, upper die and other components. During the installation process, pay attention to keep the smooth cooperation of the components, and apply lubricant in time to reduce friction.

Electrical system connection: After mechanical assembly is completed, the electrical system is connected. This includes power lines, control lines, and connections of sensors and actuators. Ensure that all lines are properly and securely connected to avoid loosening or short circuits. At the same time, follow safety regulations to ensure that electrical accidents do not occur during the operation of the equipment.

Commissioning and testing: After the installation is complete, the equipment is commissioned and tested. First of all, check whether the functions of the equipment are normal, such as whether the operation of the press is smooth, and whether the control system is sensitive. Then conduct trial operation to observe the operation of the equipment to ensure that the equipment works normally and the performance is stable.

Safety check and maintenance: Before the equipment is put into use, conduct a comprehensive safety check to ensure that the safety performance of the equipment meets the requirements. At the same time, develop a maintenance plan to regularly maintain and maintain the equipment to extend the service life of the equipment.

The above is the basic installation process of the servo electric screw press. Installation steps may vary depending on the device model, manufacturer, or specific installation environment. Therefore, during the actual installation, you are advised to refer to the installation guide and operation manual provided by the device manufacturer. In addition, if you do not have the relevant installation experience and skills, it is recommended to seek the help of professionals to ensure the correctness and safety of the installation.