The electric screw press is an important equipment in modern industrial production, so it is essential to carry out proper maintenance and maintenance. This can not only ensure the normal operation of the press, extend its service life, but also improve production efficiency and reduce the failure rate. Below, we will introduce the maintenance steps and precautions of the electric screw press in detail.

First, maintenance before use

Check that the appearance of the device is intact and there is no obvious collision or scratch.

Ensure that the grounding cable of the device is properly connected to prevent electrical failure.

Check whether the operation buttons and switches are flexible and reliable, and there is no deadlock or failure phenomenon.

Check the oil level and oil mark to ensure that the lubricating oil is sufficient and of good quality.

Verify that the safety guard is complete and effective to ensure the safety of the operator.

2. Maintenance in use

In the process of use, we should always pay attention to the operation of the electric screw press, such as abnormal sound, excessive temperature rise or leakage, should be immediately shut down for inspection.

Observe the pressure gauge and oil temperature gauge of the press to ensure that they are working within the normal range. Keep the environment around the press clean and tidy to avoid debris, moisture, etc., entering the equipment.

For the continuous operation of the electric screw press, the lubricating oil should be checked and replaced regularly according to the actual situation.

3. Maintenance after use

After use, each operation handle (switch) should be placed in neutral (zero), and cut off the power supply. Clean up oil, chips and other debris on the equipment to keep its appearance clean.

For the sliding parts of the equipment, regular lubrication maintenance should be carried out to reduce wear. Regular comprehensive inspection of the electric screw press, including electrical system, hydraulic system, mechanical structure, etc., to ensure that it is in good working condition.

Keep equipment maintenance records, including maintenance time, replacement parts and other information, in order to track the operating status of the equipment.

Through the above steps, we can effectively maintain and maintain the electric screw press to ensure its long-term stable operation and provide a reliable guarantee for production. At the same time, we should also note that each equipment has its own specific use and maintenance requirements, so in actual operation, should be based on the specific situation of the equipment and production needs to develop a corresponding maintenance plan.