In the production process of refractory brick, servo electric screw press plays a vital role. This device can achieve precise control of pressure, temperature and material through an electric servo system, resulting in the production of high-quality refractory bricks.

Adjusting factors of servo electric screw press

In the production process of refractory brick, there are many factors that affect the performance of servo electric screw press, mainly including pressure, temperature, material and so on.

Pressure: Pressure is one of the most important adjustment factors for servo electric screw presses. The appropriate pressure can ensure the density, strength and thermal stability of the firebrick. In the production process, the appropriate pressure range should be selected according to the material, size and production requirements of the firebrick.

Temperature: Temperature also has an important effect on the performance of firebricks. In the production process, the material needs to be heated to the appropriate temperature to achieve the softening and processing of the material. At the same time, for firebricks of different materials, different heating methods and temperature control should be used to ensure the quality of the product.

Material: The nature and state of the material also have a great impact on the performance of the servo electric screw press. Different materials of refractory bricks require different pressure and temperature control during processing, so corresponding adjustments need to be made for specific materials.

Adjustment steps of servo electric screw press

In order to maximize the performance of the servo electric screw press in the production of refractory bricks, the following steps can be followed:

According to the production requirements and materials of refractory bricks, set the appropriate pressure range.

The parameters of the servo electric screw press such as pressure, temperature and material are accurately measured and recorded for subsequent adjustment.

According to the actual production situation, the parameters of the servo electric screw press are adjusted, such as pressure, temperature and material.

In the adjustment process, pay attention to the changes in the quality and production efficiency of the firebrick, and make corresponding adjustments to achieve the best performance.

After the adjustment is completed, the servo electric screw press is observed and monitored for a period of time to ensure that its performance is stable and meets the production requirements.

Matters needing attention

When using the servo electric screw press, the following matters need to be noted:

Safety issues: When operating the servo electric screw pressure, safety operation procedures must be strictly observed to ensure the safety of personnel and equipment. During the operation of the device, do not extend your hands or other objects into the device to avoid accidents.

Equipment maintenance: Check and maintain the servo electric screw press regularly to ensure the normal operation of the equipment and extend the service life. To keep the equipment clean, replace the wearing parts regularly, and carry out the necessary lubrication and maintenance of the equipment.

Data acquisition: When adjusting and operating the servo electric screw pressure machine, attention should be paid to data acquisition and analysis. By recording and analyzing the data, we can better understand the performance of the equipment and the problems in the production process, and provide a basis for further optimizing the production process.

Material control: In the production process of refractory bricks, the control of materials is crucial. It is necessary to ensure that the quality and stability of the material meet the production requirements and avoid fluctuations in the quality of the refractory brick due to material problems.

Technical support: In the process of using the servo electric screw press, if you encounter technical problems or failures, you should contact professional and technical personnel in time for processing and maintenance. Do not disassemble or repair the equipment without authorization, so as not to cause unnecessary losses and safety hazards.

This paper mainly introduces how to adjust the servo electric screw press in the production process of refractory brick to give full play to its best performance. By adjusting the parameters such as pressure, temperature and material, the servo electric screw press can be precisely controlled, so as to improve the production efficiency and product quality of refractory bricks. In order to ensure the safe and stable operation of the equipment, the operator must strictly abide by the safety operation procedures and carry out the necessary data collection and technical support. In the future, with the development of refractory brick industry and technological progress, the application of servo electric screw press in refractory brick production will be more extensive and efficient.