The inspection work before the factory of the servo electric screw press is an important part of ensuring product quality, mainly including the following aspects of inspection:

Security testing

In the safety test phase, the electrical system is mainly tested to confirm its normal operation. After that, in the case of simulated power failure and gas loss, the safety protection measures such as emergency braking of the press are tested to see whether they work normally. This is to ensure that during use, the equipment can effectively respond to various emergencies and maximize the safety of operators and equipment.

Impact test

Striking force is one of the important performance parameters of servo electric screw press. Before leaving the factory, the manufacturer will strictly test and adjust the impact of the equipment. According to the different use of the equipment, different tonnage pressure testers are used to measure the impact force and verify whether it meets the set requirements. At the same time, the speed and number of strikes can also be adjusted and tested as needed.

Strike speed test

Striking speed is one of the important factors affecting the production efficiency of servo electric screw press. Before leaving the factory, the manufacturer will test the impact speed of the equipment to verify whether it can meet the set requirements. This process usually simulates the different molding process requirements of the product to verify the stability and speed adjustability of the equipment.

Raw material quality and process stability testing

The quality of raw materials and the stability of processing technology are also important factors affecting the quality of servo electric screw press products. Before leaving the factory, manufacturers need to strictly control the quality of raw materials, select service providers with good reputation, and conduct in-depth testing of raw materials to ensure that they meet the requirements of the specified standards. At the same time, it is also necessary to test the stability of the processing process, which includes the precision of each process and the compliance of parts processing.

Product inspection

Product inspection is the last step of the guarantee before leaving the factory, and it is also an important test link for the product quality of servo electric screw press. At this stage, the products produced will be comprehensively tested, including raw material testing, parts processing testing, installation testing, finished product testing and quality inspection. Once quality problems are found, immediate measures are taken to improve product quality and reliability.

In general, a series of tests carried out by the servo electric screw press manufacturer before leaving the factory is an important safeguard measure for product quality. These tests not only ensure the safety, stability and reliability of the equipment, but also ensure that the production efficiency and use of the equipment can meet customer expectations and requirements. This is also an important reflection of the manufacturer's responsibility for customers, the pursuit of product quality and the maintenance of market competitiveness.