315T servo electric screw brick press is a kind of high efficiency and high precision brick making equipment, which can meet the needs of large-scale production. In order to ensure its long-term stable operation and production efficiency, proper maintenance and maintenance are essential. The following are some precautions for the maintenance of 315T servo electric screw brick press:

Cleanliness and hygiene

Keeping equipment clean is the first step in maintenance. Clean the dust, dirt and other impurities on the surface and inside of the brick press regularly to avoid damage to the equipment and mold. At the same time, ensure that the operation area is clean and free of debris, so that the equipment can operate normally.

Periodic inspection

Regular inspection of all parts of the brick press, including motor, reducer, screw, bearing and other key parts. Make sure they are not abnormally worn or damaged, and take care to check the integrity of the wires and cables.

oiling

The 315T servo electric screw brick press requires regular lubrication to keep it running well. According to the equipment manufacturer's recommendation, use appropriate lubricants and lubrication methods to lubricate each sliding surface, gear, etc., of the brick press.

Mold maintenance

The mold is an important part of the brick press and needs regular maintenance. Check mold wear and deformation, repair or replace the damaged mold in time. At the same time, ensure that the mold is installed correctly to avoid accidents during the operation of the equipment.

Fastener inspection

Regularly check whether the fasteners of the brick press are loose, especially the screws of the key parts such as the motor and the reducer. If it is loose, tighten it in time to ensure the normal operation of the device.

Hydraulic system maintenance

Check whether the oil tank, oil pump, oil pipe and other components of the hydraulic system work normally, and whether the quality of the hydraulic oil is qualified. If there is any problem, it should be dealt with in time to ensure the normal operation of the hydraulic system.

Pneumatic system maintenance

Check whether the cylinders, gas pipes, valves and other components of the air pressure system work normally and whether the air pressure is stable. If there is any problem, it should be dealt with in time to ensure the normal operation of the air pressure system.

Safe operation

In the use of 315T servo electric screw press, you must follow the safe operating procedures. Train operators regularly to familiarize them with the operation and maintenance procedures of the equipment. At the same time, ensure that the appropriate safety protection is installed on the equipment and check its effectiveness regularly.

Record and report

Record the maintenance time, operations performed, and parts replaced. These records help to track the maintenance history of the device and identify and resolve problems in a timely manner. At the same time, the maintenance status should be reported regularly to the equipment manufacturer for necessary support and advice.

Storage and transportation

When the 315T servo electric screw brick press is not used or transported, appropriate measures should be taken to protect it. Place the device in a dry, dust-free place, away from direct sunlight and extreme temperatures. During transportation, ensure that the equipment is fixed firmly to avoid vibration and impact.

In short, correct maintenance is essential for the long-term stable operation of the 315T servo electric screw brick press. By following the above considerations, you can ensure the productivity and service life of the equipment, while ensuring the safety of the operator. In order to obtain the best maintenance results, it is recommended to maintain close contact with the equipment manufacturer and follow the maintenance guidelines and recommendations provided by it.