With the continuous advancement of industrial development, refractory brick presses have been widely used in metallurgy, building materials and other fields. However, due to the bad working environment and improper operation and other reasons, it often leads to equipment overload, affecting its stable operation. Aiming at this problem, this paper will conduct a detailed analysis from the aspects of equipment selection, maintenance and operation management, in order to provide effective solutions for ensuring the stable operation of refractory brick press.

First, equipment selection In the purchase of firebrick pressure machine, first of all need to consider its overload capacity. Overload capacity refers to the maximum pressure or force that a device can withstand. Reasonable selection of the firebrick press suitable for the work needs, and ensure that its overload capacity is slightly higher than the actual work needs, so that the equipment can be prevented from failure due to overload during the work process. Maintenance Maintaining the good condition of the equipment is essential to ensure the long-term stable operation of the equipment.

Here are some key maintenance measures:

1. Regular inspection and maintenance: Regular comprehensive inspection of the refractory brick press, including the wear of key components, the use of lubricating oil, etc. Find the problem timely repair, and according to the production process requirements of regular replacement of lubricating oil.

2. Cleaning and rust prevention: Keep the equipment clean, especially frequent cleaning of the parts that are prone to dust accumulation. In addition, it is also necessary to do a good job of anti-rust treatment, such as applying anti-rust agent or spraying anti-rust paint.

3. Pay attention to the surrounding environment of the device: Avoid exposing the device to humidity, high temperature or corrosive environment. These factors will accelerate the aging and damage of the device. At the same time, reasonable ventilation should be carried out during use to ensure heat dissipation of the equipment and avoid damage caused by overheating.

Reasonable operation management can reduce the probability of equipment overload and improve the stable operation performance of the equipment. The following suggestions are key to achieving this goal:

1. Training operators: Provide necessary training for all personnel responsible for the operation of firebrick press, so that they can understand the basic principle of the equipment, operation points and safety precautions. Operators should strictly follow the operating procedures to avoid equipment overload caused by incorrect operations.

2. Strictly implement load limits: set a reasonable working load range, operate the equipment within this range, and prohibit overload operation. If it is necessary to exceed the load range, plan in advance and take appropriate measures to ensure the safety and stability of the equipment.

3. Real-time monitoring of equipment status: Through the installation of sensors, instruments and other equipment real-time monitoring of the operating status of the refractory brick press, such as pressure, temperature, vibration and other indicators, timely detection of abnormal conditions and take appropriate measures to deal with.

In order to ensure the stable operation of the refractory brick press, we need to start from the aspects of equipment selection, maintenance and operation management. Only suitable equipment selection is not enough to ensure the stable operation of the equipment, regular maintenance and scientific operation management are also essential. Only the combination of comprehensive and effective measures can maximize the overload capacity of the refractory brick press, ensure the long-term stable operation of the equipment, and maximize the benefits in industrial production.